S & S Sarvam

FOUNDATION

Raft foundation and framed structure.



MASONRY

Thick solid concrete blocks of standard specifications, quality and brand will be used for block work.



FLOORING / TILING

Vitrified tile flooring for the entire flat except toilet & utility.

Designer tiling will be done for toilets as per architect's design. Tiling will be done up to ceiling bottom.

Steps, lift, Facia, lobby, common wall – shall be as per architect's opinion to give maximum uplift of common area.



HOME SECURITY

CCTV for common areas with DVR recording facility at the security kiosk.

Video door phone provision for each flat.



LIFT

6 High speed elevators (4 passenger and 2 bed elevators) of branded company will be provided.



SANITARY

Toilets: Hot and cold wall mixer, wall mounted white/pastel color EWC, White/pastel color wash basin (without pedestal), one tap. (non-movable parts like bottle trap, waste coupling etc.) Jaguar, Parryware, Hindware or equivalent CP fitting will be used.

Kitchen: Semi-finished kitchen.

Utility: One tap with borewell water and provision for washing machine point.

Angle valves: Will be provided for washing machine point, geyser and Aquaguard point.



JOINERY

Entrance Door: Teak wood frame with teak wood panel door as per architect's design with accessories. (3'6" wide 7' height)

Bedroom Doors: Seasoned wood frame Flush door shutter with accessories. Doors will be of enamel finish. (3' wide 7' height)

Toilet Door: Flush doors with frames will be provided with accessories. Toilet doors will be film coated and painted for water proofing. (2'6" wide 7' height)

Utility and external Doors: core wood frame with hard core panel/moulded door with accessories. (2' 6" wide 7' height)

French Door: Seasoned wood frame with seasoned wood shutters or UPVC Sliding doors

Ventilators: UPVC (Open able - top hung) – Fenesta or equivalent make.

Windows: UPVC (Open able) – Fenesta or equivalent make.

A/C provisions: Provision for split A/C's will be given inside apartment. Entire club house will be air conditioned.



PAINTING

PUTTY WITH EMULSION FINISH: All internal walls of the flat including ceiling will be finished with 2 coats of putty and emulsion over one coat of primer.

CEMENT PAINT: Lift well, lift machine room and common area ceilings.

EXTERIOR EMULSION: External walls and Internal walls of common area as per architect's opinion.

MELAMINE SPRAY POLISH: entrance door

ENAMEL PAINTING: All other doors and grill. (Two coats of enamel paint over one coat of primer)



ELECTRICAL

Concealed copper wiring of RR Kabel, Anchor, Havells or equivalent make with modular plate switches will be provided.

Centralized cabling system for DTH and telephones will be provided.

Wiring shall be done for lighting, 5 amps, 15 amps and A/c points in the apartment.

Switches – All switches shall be Anchor, Roma or equivalent make.

Common areas will be illuminated with sufficient lighting as per requirement.