Sakshya Sharone Flats

Structure

R.C.C Frames structure with RCC Columns, Beams, Slab ETC.,

Brick Masonry walls with Plastering in CM.

CCP in Stilt Floor, with two floors.

Colours and Design are as per Architect's approval.

Joineries

Main Entrance door shall be provided with First class Teak Wood, frames and shutter switch "Godrej Night Latch" or Mortise lock, Brass hinges and Lacquered brass handles will be provided.

ALL other Doors shall be provided with Teak Wood frames and 12mm thick water proof inserts or solid core flush door shutters, OST or skin door.

Bathroom Doors shall be provided with Laminated / Chemical Painted flush/ PVC doors. Door fittings will be provided with Anodized Aluminium Fittings.

Windows frames and shutters shall be of with UPVC / Teak Wood frames, glazed Shutters with MS grills.

Ventilators shall be provided UPVC / Teak Wood framed, Glazed louvers with M.S grills.

Flooring

Living / Drawing , Dining, Kitchen, and Other Bed Rooms flooring shall be provided with 2'0" x 2'0"Vitrified tiles of standard brands

Utility and Other Balcony Flooring shall be provided with 1'0" x 1'0" Ceramic tiles

Car Parking Flooring - Durocreet or Equivalent brand / rubber moulded interlocking floor tiles.

Kitchen

Kitchen flooring shall be provided with 2'0" x 2'0" Vitrified tiles of standard brands

Kitchen Platform shall be of high grade polished Black Granite top

Dado up to 2'0" high above the platform (Basic cost of tile.

Stainless Steel Kitchen sink shall be provided without drain board.

Loft and Provision for Shelves shall be provided as per drawings.

Suitable openings for exhaust fans shall be provided.

Pipe lines to sink shall be provided for Sump water.

Toilets

Anti-skid Ceramic tiles flooring.

Ceramic tile dado for about 7'0" height from the floor.

Suitable openings for exhaust fans shall be provided.

Water proofing to all toilets by Brick Bat Coba.

Stair Case

Steps and landing will have provided with Anti-Skid Tiles

Hand railing will be provided with MS Grill.

Sanitary Ware and Fittings

EWC, Wash basin shall be provided with PARRYWARE / METRO or Eq. brand, for attached bed room toilets (White Colour).

IWC shall be provided with Parryware or Eq. brand for common toilets (White Colour).

Wash basin shall be provided with PARRYWARE / HINDWARE or Eq. brand either in Dining or in common toilet (white colour).

Low level flushing cisterns of PVC or FRP fittings, plastic seat cover for EWC, Deluxe CP brass fittings and other suitable fixture

Plumbing

One sump of adequate capacity individually for receiving Metro / Panchayath Water as and when CMWSSB / Panchayath water supply becomes available to the complex.

One Over Head Tank of adequate capacity shall be provided at terrace of the building (to serve all the flats) with Two compartments for pumping water from Captive source (bore well) and water from the ground sump)

Septic Tank of adequate capacity shall be provided.

A Tap in the kitchen for Ground Sump water from overhead tank. Taps shall be provided to supply ground sump water to bath, kitchen, and bore water to toilet through overhead tank(s).

2 way Tap connections shall be provided in bathrooms with hygiene faucet with overhead shower and Hot and Cold water provision.

Concealed plumbing arrangements, with CPVC pipe line of slow guard make for hot water pipe line.

For all internal plumbing lines CPVC pipes and for External plumbing lines UPVC pipes are used.

All Plumbing fittings shall be provided with Havelles or Eq. brand.

Electrical

3 Phase Electrical supply connection with changeover facility.

Concealed copper wiring.

MCB / ELCB (Earth Leak Circuit Breaker) as per the choice of the Builder.

Provision of Electrical points as lists in table below.

Painting

All internal walls shall be applied with Acrylic Putty to have smooth surface and finally finished with one coat of acrylic primer and 2 coats of EMULSION paint.

The external walls of the apartment / building shall be initially applied with 2 coats of white cement and finally finished with 2 coats of weather proof EXTERIOR EMULSION.

Doors other than entrance door and windows with enamel paint.

Entrance / Main Door with varnish (Sealer finish / Melamine Finish).

M.S. Grills with two coat enamel paint.

(Note : All colours mentioned above are as per the promoters choice only)

Wardrobes

Provision for Wardrobes / Cupboards, in bed rooms and kitchen, ( if any additional quantity required beyond the provision will be charges extra)

Compound Wall

Compound wall be provided along with boundaries of the premises (only when the premises is from the other side) with M.S. gate as per the design and drawings.

Paved driveway/ Ramp will be provided as per the drawings.

Special Amenities

Building Elevation is as per the ARCHITECTS design.

Building Name shall be provided in Metal Letters

Flat Owner Name plate will be provided at the entrance of the APT.

Separate EB Meters for all Flats in the Main board, sub main Distribution board (DB box) in each flat for quick isolation of supply and separate common EB Meter for Common Service.

Water Proofing to all toilets by brick bat Coba

Water storages shall be water proofed

Covered Parking Space for vehicles with Common Water tap.

Safety / Covering will be provided for Motors.

Common Wash basin in terrace

Fixed Supports for drying clothes in terrace shall be provided.

Weathering course shall be provided with THERMATEK branded / eq. quality heat resistant terrace tiles.

Provision of Electrical Points

Entrance

One Bell Point and One Light Point (2 way)

Drawing

One TV Point, one Telephone Point, Two Light Points in Walls,

Two Fan Point, Provision for hanging chandelier electrical point,

Three 2 A pin points.

Dining

Two light Points in Wall, One Fan Point,

One 15 A for Fridge, One 5A pin Point at Suitable Places.

Master Bedroom

Two light Points in Wall, Fan Points at Suitable Location. (Fan and Light points will be of 2 way),

Two 5 A pin points, One 20 A Point for AC.

Other Bedroom

Two light Points in Wall, Fan Points at Suitable Location. (Fan and Light points will be of 2 way),

Two 5 A pin points, One 20 A Point for AC

Kitchen

One Light Point in Wall, One Fan and Exhaust fan points,

Two 5 A Pin Point for Mixer and Grinder,

Two 15 A Point for Aqua Guard and Micro Oven.

Attached Toilets

One Light Point,

One 5 A Pin Point for Exhaust Fan,

One 15 A point for Geyser.

Common Toilet

One Light Point,

One 5 A Pin Point for Exhaust Fan,

One 15 A point for Geyser.

Service Area

One Light Point,

One 15 A Point for Washing Machine.

Common Points

Common Light point in stairs and terrace,

Two Numbers in Compound Wall,

One point for Pump / Motor Sets.

Switches and Wires

All switches shall be of modular type of MK or Eq. brand.

All Electrical wire shall be of Finolex make or Eq. Brand with ISI mark.

Note

Any Additions or Alterations required over the above Provisions shall be provided at Extra Cost.

All the Furniture’s and Fittings shown in the Architects drawing are tentative Figs only (Which shows the place of Provision), which does not come under the scope of the Builder, if required.

All the Measurements shown in the architects drawings are indicative only and subjected to change.

EB Meters and EB cards will be provided by the TNEB as per their norms. If any delay occurs for the same, Builder will not be responsible in any manner.

All the taxes are applicable as per State and Central Govt.